Four Recommended Fujifilm X100VI Accessories for Better Handling and Everyday Protection
Taking your Fujifilm X100VI out for a walk often starts with a simple idea: travel light and stop when something catches your eye. As you spend more time with the camera, smaller details start to matter. You might want a more comfortable place to rest your thumb during a longer outing, or an easier way to keep track of the lens cap between shots.
Those everyday habits are a useful starting point when choosing Fujifilm X100VI accessories. The four Foto&Tech options below cover handling, screen protection, lens shading, and keeping the cap close by. We explain what each adds and when it makes sense, so you can choose around the way you shoot.
Recommended X100VI accessories at a glance
Foto&Tech Metal Hot Shoe Thumb Grip for Fujifilm X100VI
If your thumb regularly searches for a comfortable place to rest, consider the Foto&Tech Metal Hot Shoe Thumb Grip for Fujifilm X100V and X100VI. It slides into the hot shoe and provides a defined support point behind the camera body.
The metal grip has a listed weight of 1 oz and comes in silver, black, gold, and red. Its compact shape suits owners who want additional thumb support without adding a base plate beneath the camera.
Why we recommend it
Choose this grip when hand comfort is your main concern, particularly for street photography or walks with frequent shooting stops. The benefit depends on your hand size and holding position. After fitting it, make sure your usual buttons remain easy to reach.
The grip occupies the hot shoe, so remove it before mounting a flash in that same shoe. Keep a camera strap properly secured when carrying the camera.
Foto&Tech Tempered Glass Screen Guard for Fujifilm X100VI
The Foto&Tech Tempered Glass Screen Guard for Fujifilm X100VI and X100V adds a replaceable surface over the rear display to help guard against everyday scratches, fingerprints, and smudges.
The two-piece set provides a spare for a later replacement. Its thin glass design and multilayer anti-smudge coating are intended to maintain a clear view of the display and help manage routine surface marks.
Why we recommend it
This is a useful early purchase if you frequently carry the camera and display protection is your priority. The model-specific listing and spare guard make it a practical option for everyday camera care.
Before applying the glass, remove loose dust and align it carefully. Check touch response and edge clearance afterward. Continue protecting the camera from hard objects and pressure; a screen guard does not guarantee protection against drops.
Foto&Tech LH-100 Metal Lens Hood and 49mm Filter Adapter Ring
The Foto&Tech LH-100 Metal Lens Hood with 49mm Filter Adapter Ring combines a hood for shading the lens from stray light with a mounting option for compatible 49mm filters.
Designed for the X100V and X100VI, it has a metal construction, a listed weight of 1 oz, and black or silver finishes. The hood and adapter ring are included; filters are separate purchases.
Why we recommend it
The LH-100 is worth considering when you want both a hood and a filter adapter. Buying the two parts together simplifies that choice. A hood can help in outdoor lighting where stray light causes flare or reduced contrast, while the adapter lets you choose a compatible filter for your photographic purpose.
A hood alone does not make the X100VI weather-resistant. Fujifilm specifies its AR-X100 adapter ring and PRF-49 filter together for that purpose; equivalent sealing should not be assumed for the LH-100.
For a fuller explanation, read Does the Fujifilm X100VI Need a Lens Hood.
Foto&Tech Leather Lens Cap Keeper Sticker with String
The Foto&Tech Leather Lens Cap Keeper Sticker with String for Fujifilm X100VI and X100V helps keep the cap connected to your setup when you take it off.
Sold as a two-piece set, it uses a peel-and-stick attachment on the cap and an elastic connection. It gives the removed cap a consistent place to stay instead of moving it between pockets or putting it on a nearby surface.
Why we recommend it
Choose this keeper if searching for the cap interrupts your photography. On sightseeing trips or walks with repeated stops, keeping the cap connected makes the routine of removing and replacing it easier to manage.
Use a suitable clean attachment surface, route the tether clear of the lens and controls, and keep the hanging cap outside the frame. For attachment details, see the Lens Cap Keeper Strap Guide.
Choose a setup for your shooting routine
Everyday carry and casual photographs
Start with the screen guard if display protection is your priority. Add the keeper if the cap often ends up in a different pocket. This pairing addresses everyday surface care and organization.
Street photography and longer handheld sessions
Prioritize the thumb grip if you regularly adjust your hand to find support. Consider a screen guard alongside it if needed. Frequent external-flash users should account for the grip occupying the hot shoe.
Outdoor walks and travel
Consider the LH-100 when a hood or filter mounting option suits your photography. Check the assembled hood, filter, and cap combination, including its fit inside your pouch, before adding a keeper.
If you are buying only one item, choose the need you notice most. With no clear preference and no existing screen protection, the screen guard is a reasonable starting point. You can reassess the next purchase after using the camera.
About Foto&Tech
Foto&Tech is a U.S.-based designer and manufacturer of camera accessories, including grips, screen protectors, lens accessories, and shutter controls. Our X100VI options address specific everyday needs so you can choose additions that suit your photography.
Use the product links above to explore the option that matches your needs. If you are unsure how your existing cap, filter, or other accessories will fit together, contact Foto&Tech with the details before ordering.
Frequently asked questions
Are these accessories compatible with the X100V too?
All four linked product pages list both the Fujifilm X100V and X100VI. Match the exact product to your camera and existing accessories when ordering.
Does the LH-100 include a protective filter?
The listing describes a hood and 49mm adapter ring. A protective filter is a separate item.
Can I use the original lens cap with the LH-100?
The current product listing does not confirm original-cap fit. Verify the cap with the exact hood and filter combination you intend to use. For help before ordering, contact Foto&Tech with the cap and filter details. A keeper retains a cap but does not change its fit.
What should I check after applying the screen guard?
Check alignment, touch response, display movement, and clearance around the edges. If you also use accessories near the display, check their clearance with the protector fitted.
compatible with the X100V too?
All four linked product pages list both the Fujifilm X100V and X100VI. Match the exact product to your camera and existing accessories when ordering.
Does the LH-100 include a protective filter?
The listing describes a hood and 49mm adapter ring. A protective filter is a separate item.
Can I use the original lens cap with the LH-100?
The current product listing does not confirm original-cap fit. Verify the cap with the exact hood and filter combination you intend to use. For help before ordering, contact Foto&Tech with the cap and filter details. A keeper retains a cap but does not change its fit.
What should I check after applying the screen guard?
Check alignment, touch response, display movement, and clearance around the edges. If you also use accessories near the display, check their clearance with the protector fitted.
